 |
Product Description
| NO. | Machine Name | Qty. |
| 1 | Belt conveyor | 1 set |
| 2 | Dust cleaner | 1 set |
| 3 | IR heating oven | 1 set |
| 4 | Single roller coater | 1 set |
| 5 | 3 lamps UV dryer | 1 set |
| 6 | Single roller coater | 1 set |
| 7 | IR heating oven | 1 set |
| 8 | 5 lamps UV dryer | 1 set |
| 9 | Belt conveyor | 1 set |
(Above configuration just for reference,will design according to actual situation)
Working speed | 3-18m/min（adjustable） |
Working width | 0-1320mm |
Working thickness | 2-80mm |
Min length of item | 300mm |
Total power | 189KW |
Capacity | ~ 5,400 m2/day ~1,350,000 m2/year (Daily work time: 60 min * 8 hours, 250days) Line speed:12 m/min; width of product :average of 1m, efficient :85%) |
Workshops | Total Area ：about 224 Square meters |
Voltage | 380V 50HZ 3-phase +PE |
(Above technical parameters just for reference,will design according to actual situation)
SPC flooring UV Coating line is energy-saving, efficient and stable.
The roller coater controlled by separate motor/reducer/frequency, with best precision and stability.
It is convenient operation,maintenance, high safety factor, and good effect during the coating process.
The SPC Flooring UV Coating machine of UV dryer can be equipped with electronic variable control system, UV-LED cold light source, power dryer and paint film drying effect is more perfect.
SPC floor uses calcium powder and PVC as the main raw materials, non-toxic and renewable resources.
Even if something burns on the SPC floor ,such as cigarette or a lighter,it will not be affected.
There is a wear-resistant layer on the surface, its wear-resistant revolution can reach 8000-16000 . Ordinary laminate flooring are generally only 1200-9000 revolutions.
SPC floor produced by the SPC floor machine solves the problem of rotting, swelling and deformation of wood products due to moisture absorption and water absorption in the environment, suitable for any place.
Maintenance-free, easy to clean, saving later maintenance costs.
Wear-resistant layer has special skid resistance,feet feel more astringent when floor is wet.
Mixer unit combines hot mixer with cold mixer process, and the hot mixer material automatically enters the cold mixer to cool it, eliminate the residual gas, and prevent caking.
The SPC floor extruder converts the mixed raw materials into the SPC core layer by the double screw and T-die, and laminating the wear-resistant layer and decor film on the core layer with emboss roller, and finally form the large board of the SPC floor.
Flooring UV coating line is designed for coating UV varnish on SPC floor,WPC floor,WPC floor,LVT floor,PVC marble sheet,PVC cabinet board etc,which can give the feathers of anti scratch,bacteria roof,stain resistance.Each Coating roller controlled by individual motor to make exact coating quantity and effect.
Usually, the multi-rip saw is connected with the double end tenoner(DET) line. The multi-rip saw is used to cut the SPC large board into several small pieces, and then turn over the board and enter the DET line to do the click profile on the long and short sides. It can be matched with automatic feeding system to reduce labor.
Cut some of the upper edge of the SPC floor at 30/45°, and then paint it. After paving, the seam will show a V-shaped notch. The edge color is rich and layered, and it is more beautiful.
Bond the underlayment materials on the backside of the SPC flooring to improve the ability of sound insulation.
It can automatically fold the carton, put a certain number SPC flooring into the carton and pack it automatically, and finally stack it with a conveyor or robot.
●Provide the information in time at customer requirement and make reasonable proposals and budgeting for whole flooring production line.
●Give technical support for the customer's renovation of old facilities for free
●Provide one-stop service and support to the customer's other equipment
●Provide raw material related consultation
●On-site planning for the customers by professional engineer
●Valuable advice and recommendations on the purchasing of other auxiliary accessories and raw material
●Free training for operators
●For all sold products ,free replacement of quality problems within the warranty period,provide lifetime keep-up and maintenance service
●All-around keep-up,transportation and transformation of equipment
●Provide production and technical advisory service
●Provide on-site installation, debugging , training and remote guidance services,
We have 15 years experience in flooring industry,also has many years exporting experience. Each equipment location,passage will be designed reasonably to meet safety production.
HallMark has own factory,with the same configuration,the price is competitive.And we are familiar with the Chinese market,our suppliers provide high-quality cost-effective accessories.
We have over 15 skilled technicians offer after-sale service, will be sent to the customer's factory to assist in the installation and debugging of the flooring production line until it runs well,and asked for quick responses to customer questions within 8 hours.
We provide one-stop service, including market analysis and professional technical consultation,whole SPC flooring production line, raw materials ,Equipment installation, personnel training,Professional after-sales service team,Renovation of old equipment,make turnkey projects.
Strict quality control of equipment in production and before leaving the factory, and a complete quality management system for purchased parts.Customers are always welcome to make videos or come to the factory to know the production status.
HallMark's engineer team will design the layout according to customer’s factory space and production requirements.
