Views: 8 Author: Site Editor Publish Time: 2022-08-18 Origin: Site
SPC board Flooring is a new environmentally-friendly floor based on high-tech, featuring zero formaldehyde, mildew proof, moisture proof,
fireproof, insect proof and simple installation. SPC floor is extruded from the extruder with T-die to extrude the PVC substrate, and the three-roll
or four-roll calender is used to respectively wear the PVC wear-resistant layer, PVC color film and PVC substrate, and heat-fit and emboss the product once.
The process of SPC flooring baord, the fit is done by heat, and no glue is needed. SPC flooring materials use environmentally friendly formulations and do not contain hazardous substances. It is very popular in developed countries in Europe and America and in the Asia Pacific market. With its excellent stability and durability, the stone-plastic floor not only solves the problem of moisture deformation and mildew of the solid wood floor, but also solves the formaldehyde problem of other decoration materials. It has a wide selection of designs, suitable for indoor home improvement, hotels, hospitals, shopping malls and other public places.
The PVC mixer unit is for mixing PVC powder, CaCO3 and other additives. This equipment is widely used in PVC sheet production and profile production.
SPC Floor Sheet Extrusion Line manufactured by HallMark is one of the most important process for whole SPC flooring production line.SPC (stone plastic composite) flooring, also named Rigid vinyl plank, is a new type of environmental protection floor developed based on high technology. The raw materials are natural stone powder and PVC resin powder as well as additives.
UV Coating Machine is used to coat UV paint on the surface of SPC board/PVC marble board/PVC ceiling/PVC doors etc.. It can help to keep the glossy uniform and improve the scratch resistance of the surface.UV coating directly affects the wear resistance and scratch resistance of the SPC flooring products.
This production line is used to cut the SPC floor slab of the extrusion line into several small pieces through multi-blade saws, and then enter the slotting machine to perform button processing on the long and short sides.
SPC Floor V groove painting line is used for SPC floor V-shape groove paint .Cut some of the floor upper edge at 30/45°, and then paint it with water-based paint . After paving, the seam will show a V-shaped notch. The edge color is rich and layered, and it is more beautiful.
Bond the underlayment materials on the backside of the flooring to improve the ability of sound insulation.After adjusting the flooring straight system, the floor go with the conveyor and be coated with glue, go through the heating oven ,laminate the underlayment (IXPE/EVA) tightly by rubber rollers ,then trimming.
Packing and Stacking line of packaging machine is a high-speed automatic packaging line, designed and developed for the automatic packaging of standard plastic floors on the market.