You are here: Home » Products » SPC Flooring Production Line » SPC Floor Extrusion Line


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

SPC Floor Extrusion Line


  • 380V 50HZ 3P (or customization)

  • 2-8mm

  • 1500kg/hr

  • 11000㎏

  • 6880×2050×2760mm


Product Description

SPC Floor Extrusion Line Overview

SPC flooring

SPC Floor Sheet Extrusion Line manufactured by HallMark is one of the most important process for whole SPC flooring production line.

SPC (stone plastic composite) flooring, also named Rigid vinyl plank, is a new type of environmental protection floor developed based on high technology. The raw materials are natural stone powder and PVC resin powder as well as additives.

The SPC/PVC extruder converts the mixed raw materials into the SPC core layer by the twin screw and T-die, and laminating the wear-resistant layer and decorative film on the core layer with emboss roller, and finally form the large board of the SPC floor.

SPC Floor Extrusion Line Video

SPC Floor Extrusion Line Configuration

NO. Machine Name Qty.
1 HM 92/188,110/220 twin screw extruder 1 set
2 T-Die 1 set
3 Calender 1 set
4 PVC film lamination system 1 set
5 Cooling bracket 1 set
6 Trimming device 1 set
7 Tractor 1 set
8 Cutting machine 1 set
9 Auto stacker 1 set

(Above configuration just for reference,will design according to actual situation)

SPC Floor Extrusion Line Photos



Extruder+T die

Calender with lamination device


laminating system

PVC film lamination system

cooling bracket

Cooling bracket


Trimming blade

haul off



Cutting machine

Auto stacker2

Auto stacker

SPC Floor Extursion Line Main Parameters

Conical Twin Screw Extruder Parallel Twin Screw Extruder
Model 92/188 110/220 115 136 160
Thickness(mm) 2-8
Mould width(mm) 1050,1350
Extruder main motor(kw) 110 200 90 160/200 250
Output(24h,ton) 15 30 18-22 40-45 60-65

(Above technical parameters just for reference,will design according to actual situation)

SPC Floor Structures


 SPC Floor Advantages

spc floor advantages

  • ECO-friendly

    SPC floor uses calcium powder and PVC as the main raw materials, non-toxic and renewable resources

  • Fire Retardant

    Even if something burns on the SPC floor ,such as cigarette or a lighter,it will not be affected.

  • Wear-resistant

    There is a wear-resistant layer on the surface, its wear-resistant revolution can reach 8000-16000 . Ordinary laminate flooring are generally only 1200-9000 revolutions.

  • Waterproof and Damp-proof

    SPC floor produced by the SPC floor machine solves the problem of rotting, swelling and deformation of wood products due to moisture absorption and water absorption in the environment, suitable for any place.

  • Easy Maintenance

    Maintenance-free, easy to clean, saving later maintenance costs.

  • Easy to clean

    Wear-resistant layer has special skid resistance,feet feel more astringent when floor is wet.

What is the whole SPC Floor Production Line Include ?

spc flooring production line

  1. Mixing machine

    Mixer unit combines hot mixer with cold mixer process, and the hot mixer material automatically enters the cold mixer to cool it, eliminate the residual gas, and prevent caking.

  2. SPC floor extrusion line

    The SPC floor extruder converts the mixed raw materials into the SPC core layer by the double screw and T-die, and laminating the wear-resistant layer and decor film on the core layer with emboss roller, and finally form the large board of the SPC floor.

  3. UV coating line

    UV coating line is designed for coating UV varnish on SPC floor,WPC floor,WPC floor,LVT floor,PVC marble sheet,PVC cabinet board etc,which can give the feathers of anti scratch,bacteria roof,stain resistance.Each Coating roller controlled by individual motor to make exact coating quantity and effect.

  4. Cutting and double end tenoner line

    Usually, the multi-rip saw is connected with the double end tenoner(DET) line. The multi-rip saw is used to cut the SPC large board into several small pieces, and then turn over the board and enter the DET line to do the click profile on the long and short sides. It can be matched with automatic feeding system to reduce labor.

  5. V Groove painting line (optional)

    Cut some of the upper edge of the SPC floor at 30/45°, and then paint it. After paving, the seam will show a V-shaped notch. The edge color is rich and layered, and it is more beautiful.

  6. IXPE / EVA laminating line (optional)

    Bond the underlayment materials on the backside of the SPC flooring to improve the ability of sound insulation.

  7. Packing and Stacking line (optional)

    It can automatically fold the carton, put a certain number SPC flooring into the carton and pack it automatically, and finally stack it with a conveyor or robot.

Our Projects


Our services


●Provide the information in time at customer requirement and make reasonable proposals and budgeting for whole flooring production line.

●Give technical support for the customer's renovation of old facilities for free

●Provide one-stop service and support to the customer's other equipment

●Provide raw material related consultation


●On-site planning for the customers by professional engineer

●Valuable advice and recommendations on the purchasing of other auxiliary accessories and raw material

●Free training for operators


●For all sold products ,free replacement of quality problems within the warranty period,provide lifetime keep-up and maintenance service

●All-around keep-up,transportation and transformation of equipment

●Provide production and technical advisory service

●Provide on-site installation, debugging , training and remote guidance services,

Why choose HallMark as your supplier?

  1. Rich experience and professional design

    We have 15 years experience in flooring industry,also has many years exporting experience. Each equipment location,passage will be designed reasonably to meet  safety production.

  2. Competitive price 

    HallMark has own factory,with the same configuration,the price is competitive.And we are familiar with the Chinese market,our suppliers provide high-quality cost-effective accessories.

  3. Timely after-sale service

    We have over 15 skilled technicians offer after-sale service, will be sent to the customer's factory to assist in the installation and debugging of the flooring production line until it runs well,and asked for quick responses to customer questions within 8 hours.

  4. One-stop solution

    We provide one-stop service, including market analysis and professional technical consultation,whole SPC  flooring production line, raw materials ,Equipment installation, personnel training,Professional after-sales service team,Renovation of old equipment,make turnkey projects.

  5. Quality control

    Strict quality control of equipment in production and before leaving the factory, and a complete quality management system for purchased parts.Customers are always welcome to make videos or come to the factory to know the production status.

  6. Customized

    HallMark's engineer team will design the layout according to customer’s factory space and production requirements.

Consult Your Flooring Production Line Experts


Quick Links

Contact Us
  No. 66, Wujin Avenue West Road, Wujin District, Changzhou City, Jiangsu Province, China