 |
Product Description
Adopt threespine click processing,so that no hardware is required for furrniture assembly.
It uses double end tenoner production principle to process click profile（Groove）of threespine click furniture,high precision and high efficiency.At the same time,push out the sigle end tenoner.Double end tenoner have two models.Meet the processing requirements of the structure panels,such as tongue,groove,back board.The middle board is processed by special equipment.A tongue and a groove can also be arranged on a device and selected for use through control.Customers can choose according to the output and click profile.
If the customer small batch production,it is recommended to use one machine and install more than one function shaft,and process the workpiece separately. If the customer have big batch production, it is recommended to use two machine which have 4-6 stations,carry on the continuous processsing to the tongue and groove separately,then the single and tenoner to precess the single side groove order to increase efficiency.
If the basic connection in needed,the combination of single chain single end tenoner and double end tenoner can be adopted. Single end tenoner main process one side longitudinal groove. Double end tenoner can be selectively processed groove or tongue. It can process one side or two side at the same time.
DTE 4/6 Male Groove Double end Tenoner
| Working Width | Working Thickness | Working Speed | Station | |
| 250-2500mm | 3-60mm | 5-30m/min | 4/6Jumping cutter |
DTE 4/6 Female Groove Double end Tenoner
| Working Width | Working Thickness | Working Speed | Station | |
| 250-2500mm | 10-60mm | 5-30m/min | 4/6Jumping cutter |
DTE4/6 Male&female Groove Double en Tenoner
| Working Width | Working Thickness | Working Speed | Station | |
| 250-2500mm | 10-60mm | 5-30m/min | 4/6Jumping cutter |
DTEM4/6 Middle Groove Double en Tenoner
| Working Width | Working Thickness | Working Speed | Station | |
| 250-2500mm | 10-60mm | 5-30m/min | 4/6Jumping cutter |
DTE4/6 Female Groove Single end Tenoner
| Working Width | Working Thickness | Working Speed | Station | |
| 100-2500mm | 10-60mm | 5-30m/min | 4/6Jumping cutter |
Furniture assembly does not use any tools and tedious hardware, the assembly speed is 8-10 times faster than thetraditional furniture ; the plate is 90 locked, and the furniture is stable and strong 2-3 times higher than traditionalfurniture; there are no visible holes on the outside of the plate, the appearance of palte is simple and generousappearance; no glue paste is required for furniture assembly, and furniture is more environmentally friendland safe; and it can also be repeatedly removed and assembled without damaging the plate, it is convenient foihandling and reuse of furniture
